Product ID:CPS255675 HYDRAULIC OIL AW ISO 32
MSDS Date:01/01/1987
FSC:9150
NIIN:00-397-2855
MSDS Number: CBQJL

CHEVRON U S A INC

575 MARKET ST
SAN FRANCISCO, CA 94105-2856
US

Emergency Phone: 800-424-9300(CHEMTREC)/202-483-7616

Info Phone: 800-582-3835/800-228-3500 (MSDS)

Cage: 81230

CHEVRON PRODUCTS COMPANY LUBRICANTS AND SPECIALTY PRODUCTS

SAN RAMON, CA 94583 US

Telephone: 800-414-6737 / 800-582-3835

Cage: 81230

LUBRICATING BASE OILS CONTAINING ONE OR MORE OTH INGREDS 2,

Fraction By Weight: >98.0%

MINERAL OIL,HYDROTREATED (SEVERE), PETROLEUM DISTILLATE,

CAS: 64742-54-7

RTECS: PY8035501

MINERAL OIL, PETROLEUM DISTILLATE, SOLVENT DDEWAXED

CAS: 64742-65-0

RTECS: PY8038501

ADDITIVES

Fraction By Weight: <2.0%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:BASED ON DATA FROM SIMILAR MATLS
NOT EXPECTED TO CAUSE PROL/SIGNIF IRRIT.SKIN:BASED ON SIMILAR MATLS
NOT EXPECTED TO CAUSE PROL/SIGNIF IRRIT.SKIN/INHAL/INGEST:SYS
TOXICITY NOT BEEN DETERMINED.HOWE VER IT SHOULD BE PRACTICALLY
NON-TOXIC TO INTERNAL ORGANS IF GETS ON SKIN/INHAL/INGEST.
Explanation of Carcinogenicity:PER MSDS:NONE OF OILS REQUIRES CANCER
WARNING UNDER OSHA HAZ COMM STD,NOT BEE LISTED IN NTP NOR IARC AS
CARCINOGENS.
Effects of Overexposure:NOT EXPECTED TO CAUSE PROLONGED/SIGNIFICANT
IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE/SKIN:NO 1STAID PROCEDURES REQUIRED.AS PRECAUTION FLUSH
W/FRESH WATER FOR 15MINS.REMOVE CONTACT LENSES IF WORN.AS
PRECAUTION WASH SKIN THOROUGHLY W/SOAP/WATER.REMOVE CONTAMIN
CLOTH.INGEST:GIVE WATE R/MILK TO DRINK.TELEPHONE FOR MED
ADVICE.CONSULT MED PERSONNEL BEF INDUCING VOMIT.IF CAN'T GET ADVICE
TAKE PERSON/PROD CNTNR TO MED EMERG TREAT CNTNR/HOSP.INHAL:NOT
EXPECTED TO BE IMMED INHAL (SUPPLE)

Flash Point Method:COC
Flash Point:374F,190C
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:DO NOT ENTER ANY ENCLOSED OR CONFINED FIRE
SPACE W/O PROPER PROTECTIVE EQPMT INCLUDING SELF-CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:LEAKS/RUPRUTES IN HIGH PRESSURE SYS USING
MATLS OF THIS TYPE CAN CREATE FIRE HAZ WHEN IN VICINITY OF IGN
SOURCES(OPEN FLAME,PILOT LIGHTS,SPARK,ELECTRICAL ARCS).

Spill Release Procedures:STOP LEAK/RELEASE SOURCE.CLEANUP ASAP.CONTAIN
LIQ-PREVENT FURTHER CONTAMIN OF SOIL/SURFACEH2O/GROUNDH2O.CLEANUP
SM SPILLS W/APPROPRIATE TECHNIQUES(SORBENT MATL,PUMPING).WHERE
FEASIBLE/APPROPRIATE REMO VE COTNAMIN SOIL.FLOOLOW PROCEDURE FOR
REP/RESPONS
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT USE IN HIGH PRESSURE SYS IN
VICINITY OF FLAMES,SPARKS,HOT SURFACES.USE ONLY IN WELL VENTI
AREAS.KEEP CNTNR CLSD.DO NOT WELD/HEAT/DRILL CNTNR.
Other Precautions:RESIDUE MAY IGNITE W/EXPLO VIOLENCE IF HEATED
SUFFICIENTLY.CAUTION:DO NOT USE PRESSURE TO EMPTY DRUM OR DRUM MAY
RUPTURE W/EXPLO FORCE.MATL NOT EXPECTED TO PRESENT ANY ENVIRO
PROBLEMS OTHER THAT THOSE ASSOCIATED W/OIL SPILLS.

Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION IS NORMALLY
REQURIED. HOWEVER IF OPERATING CONDITIONS CREATE AIRBORNE
CONCENTRATIONS WHICH EXCEED RECOMMENDED EXPO STDS USE OF APPROVED
RESPIRATOR IS REQUIRED.
Ventilation:USE ADEQUATE VENTI TO KEEP AIRBORNE CONCEN OF MATL BELOW
RECOMMENDED EXPO STD.
Protective Gloves:NO SPEC PROTECTION USUALLY NECESSARY.
Eye Protection:NO SPEC PROTECTION USUALLY NECESSARY.
Other Protective Equipment:AVOID PROL/FREQU REPET SKIN CONTACT
W/MATL.SKIN CONTACT CAN BE MIN BY WEARING PROTECTIVE CLOTH.
Work Hygienic Practices:WASH CONTAMIN CLOTH.
Supplemental Safety and Health
1STAID:PROBLEM NO 1STAID PROCEDURES REQUIRED.NOTE TO DR:ACCIDENT
W/HIGH-PRESSURE EQPMT PROD MAY BE INJECTED UNDER SKIN RESUSLTING IN
SMAL SOMETIMES BLOODLESS PUCNTURE WOUND,GREAT DEAL OF SWELLING,DISC
OLORATION,INTENSE THROBBING PAIN.IMMED TREAT @SURGICAL EMERG CNTNR
RECOMMENDED.

HCC:V6
Boiling Pt:B.P. Text:680F,360C
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:0.87
pH:NA
Viscosity:28.8 CST @40C
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE.
Appearance and Odor:PALE YELLOW LIQUID.
Percent Volatiles by Volume:NA
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZING AGENTS SUCH AS CHLORATES, NITRATES,
PEROXIDES, ETC.
Stability Condition to Avoid:NO DATA AVAILABLE.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CARBON
DIOXIDE, WATER VAPOR & MAY PRODUCE OXIDES OF SULFUR.INCOMPLETE
COMBUSTION CAN PROD CO.

Waste Disposal Methods:PLACE CONTAMIN MATL IN DISPO CNTNRS.DISPOSE OF
IMANNER CONSISTENT W/APPLICABLE REGULATIONS.CONTACT LOC ENVIRO OR
HEALTH AUTHORITIES FOR APPROVED DISPOSAL OF THIS MATL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.